【 Weak current College 】 cable fire-retardant coatings product features and specifications

Cable fire protection coating is a two-component epoxy resin solvent-resistant coating with excellent fire resistance, coating evenly dense fire expansion generated honeycomb insulation, good heat insulation fire effect. Because the product 100% solids content, construction convenient, you can easily reach the desired thickness, the product does not contain any solvents, fully in line with the European emission regulations, use EPAVOC process harmless to the human body, no environmental pollution, is a high-quality green paint.

Recommended application in 220 kV, 110kv, UHP, high-voltage cable fire-resistance of the surface of the drape.

Product characteristics:

Appearance: a two-component liquid color: gray

Sheen: Matt-solid content: 99.4%

Specific gravity: 1.25kg/l Flash: no

Mixing ratio: A component: b groups = 1: 1 (weight ratio)

Time: 1 hour

Drying time: contact: 30mins before coating: 1hr

Coating efficiency: 2m2/kg

Specification:

1, fire resistance:---flame retardant (carbonization height): ≤ 2.5m

2. physical and chemical properties:---fineness: ≤ 90 µ m

Oil resistance: immersion in 7 days, wrinkle-free coating, no peeling.

Salt corrosion: immersion in 3 days, wrinkle-free coating, no peeling.

-Heat resistance: after 7 days trial, coating no bubble, not peeling off.

Resistant to heat and cold cycle: 15 second loop, coating no bubble, not peeling off.

Flexural resistance: coating does not come off layers,

Construction method:

1, brush construction: first A, B mixing two components separately.

According to weight ratio A:B = 1: 1 mixing ratio of two-component mixing, and quickly.

Use hard bristle brush brushing the surface of the cable, require uniform coating does not leak, it can be.

Brushing natural drying after 1 hour to reach the surface curing, completely curing time required 12 hours or more.

2. spray: GRACO-component special spray equipment, directly in the cable surface evenly spray again.

Notes:

1, the product of two-component mixtures should be within 1 hour after use, otherwise invalidated.

2. the product is a solvent-free systems, not recommended dollar into solvent for construction.

3. resin system does not dissolve in water and therefore cannot be confirmed water dilution of this product.

4, the product should be stored in a cool dry place, unopened State guarantee period is 18 months.

Packing specifications:

Using plastic drums, A component of 20 kg/drum; b groups 20 kilogram/barrel this product is a solvent free epoxy resin curing two-component, fire-resistant coating with excellent fire resistance, coating evenly dense fire expansion generated honeycomb insulation, good heat insulation fire effect. Because the product 100% solids content, construction convenient, you can easily reach the desired thickness, the product does not contain any solvents, fully in line with the European emission regulations, use EPAVOC process harmless to the human body, no environmental pollution, is a high-quality green paint.

Recommended application in 220 kV, 110kv, UHP, high-voltage cable fire-resistance of the surface of the drape.

Product characteristics:

Appearance: a two-component liquid color: gray

Sheen: Matt-solid content: 99.4%

Specific gravity: 1.25kg/l Flash: no

Mixing ratio: A component: b groups = 1: 1 (weight ratio)

Time: 1 hour

Drying time: contact: 30mins before coating: 1hr

Coating efficiency: 2m2/kg

Specification:

1, fire resistance:---flame retardant (carbonization height): ≤ 2.5m

2. physical and chemical properties:---fineness: ≤ 90 µ m

Oil resistance: immersion in 7 days, wrinkle-free coating, no peeling.

Salt corrosion: immersion in 3 days, wrinkle-free coating, no peeling.

-Heat resistance: after 7 days trial, coating no bubble, not peeling off.

Resistant to heat and cold cycle: 15 second loop, coating no bubble, not peeling off.

Flexural resistance: coating does not come off layers,

Construction method:

1, brush construction: first A, B mixing two components separately.

According to weight ratio A:B = 1: 1 mixing ratio of two-component mixing, and quickly.

Use hard bristle brush brushing the surface of the cable, require uniform coating does not leak, it can be.

Brushing natural drying after 1 hour to reach the surface curing, completely curing time required 12 hours or more.

2. spray: GRACO-component special spray equipment, directly in the cable surface evenly spray again.

Notes:

1, the product of two-component mixtures should be within 1 hour after use, otherwise invalidated.

2. the product is a solvent-free systems, not recommended dollar into solvent for construction.

3. resin system does not dissolve in water and therefore cannot be confirmed water dilution of this product.

4, the product should be stored in a cool dry place, the shelf life of unopened State as18 months.

Packing specifications:

Using plastic drums, A component of 20 kg/drum; b groups 20 kilogram/barrel