【 Weak current College 】 industrial enterprises set up a standard fire logo

First to standardize personnel set fire to identify industrial enterprises, fostering social unit of fire safety self management skills, raise the level of fire management, under the provincial implementation units fire safety standardization management implementation views, develop this standard.

Article 2: these standards apply to processing, manufacturing, warehousing and other industrial enterprises.

Article 3, the main entrance of industrial enterprises striking position should set the overall layout logo to indicate units of fire and water (natural water sources, fire hydrant and the municipal fire hydrant), pump adapter, fire engines, fire safety focus areas, safety and evacuation routes, major fire facilities location, etc. The General layout of the Interior identity settings should not be less than 0.5 square meters, set the outdoor should not be less than 1 square meters.

Article 4, the main entrance of industrial enterprises, conference rooms, workshops, and other sites should use the electronic screen, fixed publicity layout, set the publicity campaign for fire safety laws and regulations, the concept of slogans, fire prevention, fire alarms, fire fighting, evacuation self-help knowledge content identification.

5 fire safety important parts in the striking position settings "fire safety" identifies the important parts, and should be set to fire safety responsibilities, practice identification.

6 of flammable and combustible substances warehouse entrances should be set to "do not use open fire," and "no smoking", the wall should be set to fire safety system, practice identification; warehouse to dash indicate the storage areas, wall, crib, beam distance.

Article 7, flammable and explosive place entrance should set warning of identity, you should set the security management practice for identification, indication of the safety management system, operating rules, notices and dangerous accident emergency procedures, and other content; the storage of flammable and explosive substances stores shall be identified in the striking position settings, with the stored goods category, name, the biggest reserves, fire-fighting methods and considerations,

VIII transport flammable and explosive gas and liquid pipelines, striking position set identity, marked with the delivery category, to materials.

9 operation errors easily cause a fire hazard accidents, impact, effectiveness of fire rescue, key facilities should be set in striking position, with the Warn method and considerations.

Article 10 Office, production plant safety and evacuation door just above should set lights "security export" flag.

Article 11 should set lighting walkways to evacuate evacuation signage, set the location should be in the evacuation of the aisle and the height from the floor, corner of 1 m of wall, and spacing should not be greater than 20 m; for a bag-shaped walkways, should not be greater than 10 m; in the aisle of corner area, should not be greater than 1 m.

Article 12 security export door should be set to "no locking" identification; changbishi fire door should be set to "fire door please shut off" logo; normal elevator should be near the elevator door and set the "do not use the elevator when the fire escape" logo.

13 fire extinguishers, fire extinguisher should be placed in the box, fire extinguisher, drop point, fire extinguishers should be set above the lid logo, name and indicate the operation method, those responsible for the maintenance and repair time.

Article 14 on indoor hydrant box should be set to indicate the name, identified operational use methods, responsible for maintenance and repair time, prompt may not occupy, occlusion.

Article 15 near manual fire alarm button should set fire alarm button identifies and indicates the method to use.

Article 16 near fire shutter should be set to "fire curtain stacked items under" identity is strictly forbidden, and dashes indicate operation; fire shutter button and the smoke button should set the "fire fighting facilities is blocking the" identifies the button.

17 building of automatic fire facilities should be set up automatic fire-fighting facilities building qualified identity, marking system name, use number, maintenance, inspection, inspection, inspection dates, and other content.

Building automatic fire-fighting facilities qualified ID should be the following requirements: have room for fire control, posted at linkage control cabinet corner; only the automatic fire alarm system, posted at alarm control cabinet; only the upper-left corner of the sprinkler system, posted at pump control cabinet of the upper-left corner; other times, posted in a prominent and attended.

Article 18 of the industrial enterprises with fire control room or fire control equipment, its identity setting is also in the light of the fire control room fire identity management standards.

Article 19 on the fire pump door should be set to "no-fire focus parts on fire," identifies the wall should be set to fire safety responsibilities of the system, the operating procedures for identifying, fire pumps, pump control cabinet shall identify the categories, number, person responsible for maintenance and maintenance time.

Article 20 of the fire water tank door should be set to "no-fire focus parts idler into" identity, fire water tank capacity should be marked on the box, the maintenance of responsible persons, considerations.

Article 21 distribution room and generator room door should be set to "no-fire focus parts on fire," identifies the wall should be set to fire safety responsibilities, practice identification.

Article 22 of the extinguishing agent stockpiling point striking position should set identity that indicate the type of storage medium, name, stock.

Article 23 the underground fire hydrants, water pump outdoors combined with a nearby wall should set identity that indicate the name, usage, maintenance, repair and maintenance time.

Article 24 should fire water tank striking position, with the set ID, volume intake.

Article 25 should be set up near the fire road fire road marking, marked with the words "fire truck road" and the width of the tip is strictly prohibited.

26 fire safety information identifies the content should be under fire safety management work is regularly updated.

Article 27 shall strengthen the identity of the fireMaintenance, administration, if it is damaged, missing and should be replaced in a timely manner.

Article 28 the identified need for fire facilities indicate maintenance responsibility, check the maintenance time, maintaining responsible change and each inspection, maintenance, should be specified.

Article 29 national standards and the standards on the fire identify specifications, dimensions, should be required to produce; not provided for by the provincial and municipal fire departments according to local conditions and be clear.